Medical Device Parts
Surgical & Orthopaedic Components
Instrument bodies, bone plates, drill guides and implant trial components.
View
HRX-MD-01 · Medical Device Parts
Endoscope Precision Components — Medical Device Parts
Miniature stainless and titanium parts for endoscopic instruments.
Tolerance±0.01 mm
MOQ10 pcs
Lead time15–20 days
AvailabilityMade to order
Applications
- Rigid and flexible endoscopes
- Laparoscopic instruments
- Surgical handpieces
- Diagnostic device housings
Endoscope components are small, complex and unforgiving — a burr you cannot see is a burr the surgeon will feel. We machine endoscope heads, connector bodies, articulation links and channel blocks from 316L stainless and Ti-6Al-4V, holding ±0.01 mm on mating features and deburring under a microscope to a specified edge break. Parts are cleaned in an ultrasonic bath, packed in a controlled area and supplied with material certificates, so they arrive ready for your assembly line.
Specifications
- Material: Stainless 316L / 17-4PH / Titanium Ti-6Al-4V
- Dimensions: Ø 3–60 mm, L up to 180 mm
- Tolerance: ±0.01 mm (critical ±0.005 mm)
- Wall thickness: 0.3 – 3.0 mm
- Bore tolerance: H7 on locating bores
- Surface roughness: Ra 0.4 µm (Ra 0.2 mirror)
- Biocompatibility: ISO 10993 compliant material, cert. available
- Sterilisation: Autoclave / EO / plasma compatible
- Cleanliness: Ultrasonic cleaned, particle controlled
- Machine: CNC turning + 4-axis milling, Swiss-type
- Inspection: CMM, optical microscope, roughness tester
- MOQ: 10 pieces
- Lead time: 15–20 working days
Key features
- ±0.01 mm on mating and sealing features
- Microscopic deburring to a defined edge break
- Ultrasonic cleaned, packed in controlled area
- Material certificate to EN 10204 3.1
- ISO 13485 documented process on request
Scope of delivery
- Individually packed in clean-room bags
- Ultrasonic cleaned before packing
- Material certificate enclosed
- Full dimensional report per batch
Quality control
Every batch is checked on a coordinate measuring machine, with calipers, micrometers and gauge blocks on the shop floor. A dimensional report is available with each shipment and first-article inspection is free on series orders.
Competitive advantages
- vs. Cast / investment-cast endoscope parts: CNC-machined 316L and titanium: no intergranular corrosion, full material traceability, batch biocompatibility certification
- vs. 3D-printed (SLM) metal parts: ±0.01 mm on a Swiss-type CNC, no SLM surface roughness or powder porosity
- vs. OEM in-house machining (EU/JP): MOQ of 10 pcs vs. a typical OEM run of 1,000+; prototype and series on the same programme and fixture
- vs. Uncertified CNC suppliers: EN 10204 3.1 material certificate and ISO 13485 documented process per batch
Frequently asked questions
What file formats do you accept?
STEP (.stp/.step) or IGES (.igs) for 3D, PDF or DWG for 2D drawings with tolerances and surface finish. If you only have a physical sample, we can reverse-engineer it — and a photo with the key dimensions is enough for a budget estimate.
What tolerances can you hold?
Standard machining tolerance is ±0.05 mm, and ±0.01 mm on features you mark as critical. Locating bores can be held to H7. Tell us which dimensions actually matter — over-tolerancing is the fastest way to raise cost without improving the part.
Is there a minimum order quantity?
No. We machine one piece as readily as one thousand. Unit price improves noticeably at 50, 200 and 1,000 pieces because setup and programming amortise, and we use the same programme and fixtures from prototype through to series.
Related parts
Popular
Drone Parts
Drone Arm & Motor Mount
Lightweight 7075 arm with integrated motor mount and cable routing.
View
Drone Parts
Gimbal Bracket & Camera Mount
Vibration-isolated bracket with tight bore alignment for camera payloads.
View